|Bonus Area:||864 sq ft|
|Garage Area:||533 sq ft|
|Number of Stories:||1|
|Max Ridge Height:||27'0 from Front Door Floor Level|
|Primary Roof Pitch:||12:12|
|Roof Load:||32 psf|
|Porch:||190 sq ft|
Sleek metal roofing and horizontal siding ensures that this detached garage with workshop will blend into and compliment any building site location. The first level has a nine foot ceiling height while the second level side walls start at three feet high and slope up thirteen foot six inches at the ridge. The unfinished second level loft with vaulted ceilings is intentionally left undeveloped to allow your personalization of this area. A rear facing sundeck increases the flexibility of this space.
We are sorry, but an estimated cost build report is not available for this particular plan.
Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
A: Re: Design 76049. 1. The perimeter wall is a poured concrete stem wall sitting on a continuous poured concrete strip footing, with reinforcing called up in the wall and the strip footing. 2. The exterior wood framed walls are 2 x 6 studs at 16” o.c. 3. The roof joists are 2 x 12’s at 24” o.c. 4. I only have a PDF file version presently available for this design. Thank you for your interest in one of my designs. Please email with questions or if you require any additional information.
A: Yes it is possible to remove the wood post in the double garage area. The easiest way would be to slide the existing wood post in the garage area back to the staircase wall. Then locate the only loft post directly above the lower post and redesign the loft ridge beam size accordingly. Best regards, Regan
A: Hi, The original design location has a deep snow accumulation and the client wanted to protect his siding, hence the high concrete walls above grade. The original design called for a rustic build so the client requested oversized heavy posts, floor support beams and heavy ridge beam all from rough sawn material. If you wanted to eliminate all these features the design could be modified to incorporate engineered attic trusses which would clear span this width. Thank you for your interest in one of my designs. Best regards, Regan
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.Add to cart